Double Glazing Vs Secondary Glazing

What is Double Glazing?

Double glazed windows use two sheets of glass with a gap between them that creates an insulating barrier. The gap can either be filled with a heavy inert gas such as Argon or it can be a vacuum; both of these act to slow the movement of heat from one side of the window to the other.

What is Secondary Glazing?

Secondary glazing involves installing supplementary glazing on the inside of an existing single-glazed window. It can be permanent, although often secondary glazing panels are added as a temporary measure.

Double-glazing is more expensive than secondary glazing

Double-glazing is considerably more expensive than secondary glazing, the reason being that if you decide to install double-glazing, you need entirely new units fitted – you cannot simply retrofit a second sheet of glass to single glazing.

In order for double-glazing windows to be effective thermal barriers, the gap between the panes of glass needs to be airtight and filled with an inert gas (or a vacuum). Hence for each window where you want double-glazing, a company will need to come around to your house and measure up and produce the windows specifically for you.

Secondary glazing is far cheaper – you can buy DIY kits or get installers to come and fit the supplementary glazing onto the inside of the existing window frame.

Secondary Glazing can be a DIY job; double glazing needs a professional!

As mentioned above the double-glazing units have to be made to order for your home, however once they have been built (when I had these installed it took about 6 weeks for them to be made), the installer can install about 3 windows per day. So the process is relatively quick, however this is certainly not a DIY project.

Installing secondary glazing can be done as a DIY job, however there are also companies out there that can come and install the secondary glazing for you. In comparison, since you don’t need to remove any existing window units to install secondary glazing, the process of installation is far simpler.

Which type of glazing is best to minimise heat loss?

One of the major reasons for replacing your existing windows with either double-glazing or secondary glazing is to increase the energy efficiency of your home – helping to reduce your energy bills. You will be glad to hear that both double-glazing and secondary glazing do an admirable job here. Double-glazing though is about twice as effective as secondary glazing at stopping heat escaping the home. If you swapped all your single glazed windows in an average three-bed home, you would save about £150 a year on your heating. Adding secondary glazing to the existing single glazing would save you about £75 a year. The uPVC double-glazing units should be good for 20 years or more, so payback is relatively slow, but you will get there eventually!

Which should I choose – double glazing or secondary glazing?

Your decision will depend largely on the sort of property you’re looking to buy for, or your budget.

Often your choice will be dictated for you by conservation laws or your budget.

Cost of double glazing vs. secondary glazing

Fitting secondary glazing is understandably considerably cheaper than installing double glazing.

On average, secondary glazing costs £97 per window, although this will of course be impacted by the size of the window.

The cost of a double glazed window depends on the materials used and of course, the size of the window; however the average cost for a double glazed window is around £500.

Leave a Reply

Your email address will not be published. Required fields are marked *